Ellicon
Προβολή Πλέγματος:
Apocalypse DB-3012R D1
480,00€
Specifications
Model
DB-3012R D1
Type
Subwoofer
Size
12 inch
Voice coil size
3.00 inch
Cone
Paper
Magnet
Ferrite
Voice coil wire
None
Surround
Foam
RMS Power
2800 W
MAX Power
5600 W
Frame
Alu
Impedance
1+1
SPL
86.00dB
Fs
33.00Hz
Qts
0.41
BL
23.80
Vas
29.50 L
Xmeh
38.00 mm
Xmax
19.00 mm
Mounting depth
inch (224.0 mm)
Cut-out dimension
inch (284.0 mm)
Gross weight
lb (27.90 kg)
CAM 220
36,00€
Specification: - Image sensor: Hi-definition Color CCD - TV system: NTSC - Effective pixels: 648 X 488 pixels - Resolution: 480 TV lines - Lens Angle: 170 degree - Power supply: DC 12V - Waterproof grade: IP67 Package: - 1 x Car Rear View Camera - 1 x DC power cable - 1 x AV cable
CAM 240
40,00€
Image sensor
OV7959/PC7070
Effective Pixels
656X492
Resolution
420TV Lines
Lens angle
150 degrees
Minimum illumination
0.5Lux
System
NTSC
Video output
1.0Vpp at 750hm
Power
12V-14V
Current consumption
100mA
Diameter
22.3mm
Operating Temperature(Deg C)
-10-+50(RH95%Max)
Storage Temperature(Deg C)
-20-+65(RH95% Max)
Wide-Angle, Waterproof and Anti-shock anti shockproof
Package
1pcs Rear camera
1pcs Video cable
1pcs 22.3mm Drill
22.3mm Rear Camera
CAM 280
60,00€
Specifications: - 1/4 Inch CMOS Rear View Back-Up Camera - Super Wide 120-170 Degree Viewing Angle - Waterproof Grade IP67 - Backlight Compensation - TV System: PAL or NTSC - Resolution/Horizontal Definition: 420 TVL - Picture Pixels: 640 x 480 PAL Package: 1 x Woolkom Car Rear View Camera 1 x DC Power Cable 1 x RCA Cable
CAM 360
40,00€
Image Sensor
PC1030
Waterproof Grade
IP68
Resolution
420TV Line
Lens
1.9mm
Lens Angle
1.9mm (170 degree)
Effective Pixel
628*582 pixels
Sensing Area
5.78*4.19 mm
Minimum Illumination
0.3Lux/F1.2
TV System
PAL/NTSC
Electronic Shutter
1/50-10,000 seconds
Current Consumption
≤100mA
SNR
Better than 48dB
Power Supply
12V DC (+/-10%)
Synchronization System
Internal
Video Output
RCA connector 1.0vp-p, 75ohm
Operating Temperature
-30 to 50 degrees centigrade, RH95%
Storage Temperature
-40 to 60 degrees centigrade, RH95% Max.
Other Items
Automatic white balance, AGC and BLC
Comfort Mat Blockshot 8mm
75,00€
Τιμή Πακέτου
Comfort Mat BLOCKSHOT is a multi-layer material with an acoustic membrane. The material is totally water proof with a great adhesion due to a sealant type glue. Used as a second layer. It consists of 3 layers: a membrane with high density acoustic mastic, sound absorbing material and adhesive sealant. Thanks to the sound isolating membrane, BLOCKSHOT blocks noises up to 80%, preventing them from getting into the car interior.
Main features of Blockshot: – High level of noise level reduction – up to 30 dB – Convenience and fast installation – Can be mounted on vertical areas – Water proof, high adhesion sealant glue – Does not absorb moisture
Thickness – 8 mm, Sheet size – 500 x 700 mm, Sheet weight – 1,8 kg, Weight – 5,14 kg/m2, Adhesion – 6-8 N / cm, Water proof material – YES; Water proof glue – YES. Used as a 2nd layer. 5 pcs in one pack.
Place to use: Interior and trunk floor Engine firewall Wheel arches
Comfort Mat BLOCKSHOT is a multi-layer material with an acoustic membrane. The material is totally water proof with a great adhesion due to a sealant type glue. Used as a second layer. It consists of 3 layers: a membrane with high density acoustic mastic, sound absorbing material and adhesive sealant. Thanks to the sound isolating membrane, BLOCKSHOT blocks noises up to 80%, preventing them from getting into the car interior.
Main features of Blockshot: – High level of noise level reduction – up to 30 dB – Convenience and fast installation – Can be mounted on vertical areas – Water proof, high adhesion sealant glue – Does not absorb moisture
Thickness – 8 mm, Sheet size – 500 x 700 mm, Sheet weight – 1,8 kg, Weight – 5,14 kg/m2, Adhesion – 6-8 N / cm, Water proof material – YES; Water proof glue – YES. Used as a 2nd layer. 5 pcs in one pack.
Place to use: Interior and trunk floor Engine firewall Wheel arches
Comfort Mat Bronze 4mm
125,00€
Τιμή Πακέτου
Comfort Mat BRONZE 4 mm is a bugdet mastic vibration deadening mat for zones with high vibration loads. Universal vibration deadening material with thickness of 4 mm has a good adhesion to metal, mastic is made from a mixture of special polymers, reinforced with aluminum foil. The use of a modified elastomer in the composition of the mastic gives the material a good mechanical loss factor, good adhesion, resistance to environment and a wide temperature range of work. BRONZE series mats are not afraid of water, they have sealing and anti-corrosion features and dont need heating during installation.
Thickness – 4 mm, Sheet size – 500 x 700 mm, Foil thickness: 60 microns. Mechanical loss factor – 0.39, Sheet weight – 2,64 kg, Weight – 7.54 kg/m2, Adhesion – 6 N / cm, Water proof – YES. Used as a 1st layer. 10 pcs in one pack.
Place to use: Interior and trunk floor Engine firewall Wheel arches
Comfort Mat BRONZE 4 mm is a bugdet mastic vibration deadening mat for zones with high vibration loads. Universal vibration deadening material with thickness of 4 mm has a good adhesion to metal, mastic is made from a mixture of special polymers, reinforced with aluminum foil. The use of a modified elastomer in the composition of the mastic gives the material a good mechanical loss factor, good adhesion, resistance to environment and a wide temperature range of work. BRONZE series mats are not afraid of water, they have sealing and anti-corrosion features and dont need heating during installation.
Thickness – 4 mm, Sheet size – 500 x 700 mm, Foil thickness: 60 microns. Mechanical loss factor – 0.39, Sheet weight – 2,64 kg, Weight – 7.54 kg/m2, Adhesion – 6 N / cm, Water proof – YES. Used as a 1st layer. 10 pcs in one pack.
Place to use: Interior and trunk floor Engine firewall Wheel arches
Comfort Mat Cobra 2,3 mm
140,00€
Τιμή Πακέτου
Comfort Mat COBRA is a 2,3mm vibration deadening mat with foil thickness of 120 microns. It has an increased adhesion to metal, mastic is made from a mixture of special polymers. The use of a modified elastomer in the composition of the mastic gives the material a high mechanical loss factor, excellent adhesion, resistance to environment and a wide temperature range of work. COBRA mats are not afraid of water, they have sealant and anti-corrosion features and dont need heating during installation.
Thickness – 2,3 mm, Sheet size – 500 x 700 mm, Foil thickness: 120 microns. Mechanical loss factor – 0.40, Sheet weight – 0,95 kg, Weight – 2,71 kg/m2, Adhesion – 14 N / cm, Water proof – YES. Used as a 1st layer. 10 pcs in one pack.
Place to use: Doors Roof Hood Trunk lid
Comfort Mat COBRA is a 2,3mm vibration deadening mat with foil thickness of 120 microns. It has an increased adhesion to metal, mastic is made from a mixture of special polymers. The use of a modified elastomer in the composition of the mastic gives the material a high mechanical loss factor, excellent adhesion, resistance to environment and a wide temperature range of work. COBRA mats are not afraid of water, they have sealant and anti-corrosion features and dont need heating during installation.
Thickness – 2,3 mm, Sheet size – 500 x 700 mm, Foil thickness: 120 microns. Mechanical loss factor – 0.40, Sheet weight – 0,95 kg, Weight – 2,71 kg/m2, Adhesion – 14 N / cm, Water proof – YES. Used as a 1st layer. 10 pcs in one pack.
Place to use: Doors Roof Hood Trunk lid
Comfort Mat Skyline 7mm
77,00€
Τιμή Πακέτου
Comfort Mat SKYLINE (2nd layer) is the lightest of all existing membrane noise isolator. The material is totally water proof with a great adhesion due to a sealant type glue. The working part of the sound isolating material consists of a soundproofing layer covered with a dense thin membrane. The final aluminized layer allows us to get high adhesion for the next layer – we recommend to use a soft sound absorber for the best result. As a result we have a very easy installation, absolute moisture resistance, high adhesion to vertical surfaces. It is the lightest among similar materials, which give us a possibility to use membrane materials on the roof of a car.
Thickness – 7 mm, Sheet size – 350 x 500 mm, Sheet weight – 0.5 kg, Weight – 3,14 kg/m2, Adhesion – 6-8 N / cm, Water proof material – YES; Water proof glue – YES. Used as a 2nd layer. 8 pcs in one pack.
Place to use: Roof
Comfort Mat SKYLINE (2nd layer) is the lightest of all existing membrane noise isolator. The material is totally water proof with a great adhesion due to a sealant type glue. The working part of the sound isolating material consists of a soundproofing layer covered with a dense thin membrane. The final aluminized layer allows us to get high adhesion for the next layer – we recommend to use a soft sound absorber for the best result. As a result we have a very easy installation, absolute moisture resistance, high adhesion to vertical surfaces. It is the lightest among similar materials, which give us a possibility to use membrane materials on the roof of a car.
Thickness – 7 mm, Sheet size – 350 x 500 mm, Sheet weight – 0.5 kg, Weight – 3,14 kg/m2, Adhesion – 6-8 N / cm, Water proof material – YES; Water proof glue – YES. Used as a 2nd layer. 8 pcs in one pack.
Place to use: Roof
Comfort Mat Softwave Expert 15mm
34,99€
Τιμή Φύλλου
Comfort Mat SOFT WAVE EXPERT 15 (2nd layer). Comming from the professional sound recording studio, it is the best 15 mm sound absorber on the market that is successfully used in the car. Thanks to adding of low molecular weight polymers, it was possible to give the material unique acoustic and performance features. The mounting layer is made of moisture resistant glue.
Soft Wave EXPERT is a sound-absorbing and sealing material capable of providing maximum noise absorption in a wide frequency range due to the wavy surface, the unique combination of an open-cell microporous elastic structure and high density. The “shape-memory” feature of the material, along with the necessary softness, allows the SoftWave EXPERT to be installed even in the tightest places.
Features: – increased durability and wear resistance in combination with a soft elastic structure, – excellent noise absorbing, – shape-memory effect.
Thickness – 15 mm, Sheet size – 700 x 1000 mm, Sheet weight – 0,39 kg, Weight – 0,56 kg/m2, Water proof material – NO; Water proof glue – YES. Used as a 2nd layer. 15 pcs in one pack.
Place to use: Door cards Wheel arches Roof Trunk lid Engine firewall
Comfort Mat SOFT WAVE EXPERT 15 (2nd layer). Comming from the professional sound recording studio, it is the best 15 mm sound absorber on the market that is successfully used in the car. Thanks to adding of low molecular weight polymers, it was possible to give the material unique acoustic and performance features. The mounting layer is made of moisture resistant glue.
Soft Wave EXPERT is a sound-absorbing and sealing material capable of providing maximum noise absorption in a wide frequency range due to the wavy surface, the unique combination of an open-cell microporous elastic structure and high density. The “shape-memory” feature of the material, along with the necessary softness, allows the SoftWave EXPERT to be installed even in the tightest places.
Features: – increased durability and wear resistance in combination with a soft elastic structure, – excellent noise absorbing, – shape-memory effect.
Thickness – 15 mm, Sheet size – 700 x 1000 mm, Sheet weight – 0,39 kg, Weight – 0,56 kg/m2, Water proof material – NO; Water proof glue – YES. Used as a 2nd layer. 15 pcs in one pack.
Place to use: Door cards Wheel arches Roof Trunk lid Engine firewall
Comfort Mat Tsunami 18mm
70,00€
Τιμή Πακέτου
Comfort Mat TSUNAMI (2nd layer) is an updated product in Comfort Mat Expert range of materials.It is an acoustic foam AcoFoam II, made on the basis of a mixture of synthetic rubbers, 18 mm thick with a strong sealant type adhesive.
The material is designed for installation on the external “panel” of the door, for professional high-quality acoustic preparation of the door volume. Eliminates negative and acoustic phenomena: reflection, standing waves, superposition of waves one on top of another (“ECHO” effect). It greatly improves the sound quality of acoustic speakers, and is also an excellent noise isolator.
Thickness – 18 mm, Sheet size – 350 x 500 mm, Adhesion – 5-8 N / cm, Water proof material – YES; Water proof glue – YES. Used as a 2nd layer. 4 pcs in one pack.
Place to use: Doors/Wheels arches
Comfort Mat TSUNAMI (2nd layer) is an updated product in Comfort Mat Expert range of materials.It is an acoustic foam AcoFoam II, made on the basis of a mixture of synthetic rubbers, 18 mm thick with a strong sealant type adhesive.
The material is designed for installation on the external “panel” of the door, for professional high-quality acoustic preparation of the door volume. Eliminates negative and acoustic phenomena: reflection, standing waves, superposition of waves one on top of another (“ECHO” effect). It greatly improves the sound quality of acoustic speakers, and is also an excellent noise isolator.
Thickness – 18 mm, Sheet size – 350 x 500 mm, Adhesion – 5-8 N / cm, Water proof material – YES; Water proof glue – YES. Used as a 2nd layer. 4 pcs in one pack.
Place to use: Doors/Wheels arches
Comfort Mat Ultrasoft 10mm
23,99€
Τιμή Φύλλου
Comfort Mat ULTRASOFT 10 (2nd layer) is one of the best noise absorbing and sealing materials made of high density polyurethane foam filled with special polymers.
Thickness – 10 mm, Sheet size – 700 x 1000 mm, Sheet weight – 0,4 kg, Weight – 0,57 kg/m2, Water proof material – NO; Water proof glue – YES. Used as a 2nd layer. 15 pcs in one pack.
Place to use: Door cards Wheel arches Roof Trunk lid Engine firewall
Comfort Mat ULTRASOFT 10 (2nd layer) is one of the best noise absorbing and sealing materials made of high density polyurethane foam filled with special polymers.
Thickness – 10 mm, Sheet size – 700 x 1000 mm, Sheet weight – 0,4 kg, Weight – 0,57 kg/m2, Water proof material – NO; Water proof glue – YES. Used as a 2nd layer. 15 pcs in one pack.
Place to use: Door cards Wheel arches Roof Trunk lid Engine firewall
Comfort Mat Ultrasoft 5mm
18,00€
Τιμή Φύλλου
Comfort Mat ULTRASOFT 5 (2nd layer) is one of the best noise absorbing and sealing materials made of high density polyurethane foam filled with special polymers.
Thickness – 5 mm, Sheet size – 700 x 1000 mm, Sheet weight – 0,29 kg, Weight – 0,41 kg/m2, Water proof material – NO; Water proof glue – YES. Used as a 2nd layer. 30 pcs in one pack.
Place to use: Door cards Roof Trunk lid
Comfort Mat ULTRASOFT 5 (2nd layer) is one of the best noise absorbing and sealing materials made of high density polyurethane foam filled with special polymers.
Thickness – 5 mm, Sheet size – 700 x 1000 mm, Sheet weight – 0,29 kg, Weight – 0,41 kg/m2, Water proof material – NO; Water proof glue – YES. Used as a 2nd layer. 30 pcs in one pack.
Place to use: Door cards Roof Trunk lid
Comfort Mat Vespa 2,5 mm
115,00€
Τιμή Πακέτου
Comfort Mat VESPA 2,5 mm is a classic mastic vibration deadening mat for zones with light or medium vibration loads. Universal vibration deadening material with thickness of 2.5 mm has increased adhesion to metal, mastic is made from a mixture of special polymers, reinforced with aluminum foil. The use of a modified elastomer in the composition of the mastic gives the material a high mechanical loss factor, excellent adhesion, resistance to environment and a wide temperature range of work. VESPA mats are not afraid of water, they have sealing and anti-corrosion features and dont need heating during installation.
Thickness – 2.5 mm, Sheet size – 500 x 700 mm, Foil thickness: 100 microns. Mechanical loss factor – 0.36, Sheet weight – 1.23 kg , Weight – 3.51 kg/m2, Adhesion – 14 N / cm, Water proof – YES. Used as a 1st layer. 10 pcs in one pack.
Place to use: Doors Roof Hood Trunk lid
Comfort Mat VESPA 2,5 mm is a classic mastic vibration deadening mat for zones with light or medium vibration loads. Universal vibration deadening material with thickness of 2.5 mm has increased adhesion to metal, mastic is made from a mixture of special polymers, reinforced with aluminum foil. The use of a modified elastomer in the composition of the mastic gives the material a high mechanical loss factor, excellent adhesion, resistance to environment and a wide temperature range of work. VESPA mats are not afraid of water, they have sealing and anti-corrosion features and dont need heating during installation.
Thickness – 2.5 mm, Sheet size – 500 x 700 mm, Foil thickness: 100 microns. Mechanical loss factor – 0.36, Sheet weight – 1.23 kg , Weight – 3.51 kg/m2, Adhesion – 14 N / cm, Water proof – YES. Used as a 1st layer. 10 pcs in one pack.
Place to use: Doors Roof Hood Trunk lid
Conchord ADL 2 A
4,01€
Για Η7
Kia: K3, K4, K5, Sorento, Ge Rui,
Sportage……
Modern: Phase One, Cool, Nine Generation Sonata, New Victory
Up to ... domestic new way win, Mitsubishi Oulland low beam
HYUNDAI Elantra KIA Rio Carens
HYUNDAI: Elantra 00>06, Kona, J30, Santa Fè, Sonata, Veloster, Tucson 2016>18 Coupè, Veloster KIA: Rio 00>11, Ceed, Cerato 2013>, Sorrento, Sportage, Optima 2010>16, K4, K5