Το καλάθι μου

0 προϊόντ(α): 0,00€

  • Το καλάθι αγορών είναι άδειο!

BLAM

Προβολή Πλέγματος:
SR165S

SR165S

200,00€




KIT SR165S










HIGH-SENSITIVITY TWO-WAY COMPONENT SPEAKER SYSTEM


Max power 150 W – Rated power 75 W


Frequency response 60 Hz – 25 kHz


Impedance 3 Ω – Sensitivity 93 dB


THIS KIT INCLUDES



  • Woofer 165 mm


Glass fiber reinforced composite salad bowl


High quality treated cellulose pulp membrane


All-round butyl suspension


Spider long life “Conex”


25 mm voice coil on Kapton former


Magnetic motor 85 x 17 mm


5 mm magnetic circuit



  • Tweeter


High quality 20 mm soft dome tweeter


N38 noedymium motor


Integrated high-pass filters 6 dB/octave


Adjustable tweeter level 0 dB or -3dB


Kit composition



  • 2 woofers, 2 tweeters, 2 filtres

  • Mounting screws and accessories for tweeters – Inclined stand included

  • User manual





100 MNS

100 MNS

240,00€

Technical details Max Power 80 W – Rated Power 40 W Frequency Response 90 Hz – 30 kHz Sensitivity 92.7 dB – Impedance 2 Ω Composition Woofer: Original BLAM Bowl in Fiberglass Reinforced Composite Removable Studs Fiberglass diaphragm Spider long-life butyl peripheral suspension "Conex" 25 mm coil on Kapton stand 40 mm neodymium motor Thick magnetic circuit (4 mm ) "Plug and Play" connector for Mercedes Very high quality 25 mm soft dome tweeter Neodymium N38 motor 6dB/octave high-pass in-line filter (Polypropylene capacitor) Supplied Accessories Owner's manual 2 Mercedes "Y" spliter cables.


ΠΕΡΙΣΣΟΤΕΡΕΣ ΠΛΗΡΟΦΟΡΙΕΣ

130 RC
130 RC
130 RC

130 RC

140,00€

Component Speaker 


Max power 120 W Nominal power 60 W 

Impedance 3 : Freq. Response 80 Hz - 25 KHz 

Sensitivity (2,83V/1m) 92,3 dB 

Magnet Ferrite Magnet size Ø x h 80 x 15 mm 3,150‘’x 0,591‘’ 

Total driver displacement 0,158 l 0,006 cf 

Weight of one component 0,785 kg 1,731 lb 

Voice coil Ø 25 mm 0,984“ 

Voice coil height 11 mm 0,433“ 

Cone Cellulose pulp 
Blam 4 καναλιών RA 704 DSP PRO

Blam 4 καναλιών RA 704 DSP PRO

540,00€
Description

4-CHANNEL PLUG & PLAY AMPLIFIER WITH INTEGRATED DSP

 

Plug and play installation in the car without cutting original wires (different cables available). Delivered with cables.

 

RMS Power (4 Ohms) when powered directly from Battery 70 W x 4

RMS Power (4 Ohms) when powered from OEM Wires 50 W x 4

Frequency response: 20 Hz ~ 20 KHz

Distortion: 1 KHz < 0.1%

Supply voltage range: 9 V – 15 V

Signal/Noise ratio: > 90 dB

Standby current: < 0.4 mA

Class-D amp efficiency: 95%+

Maximum operating current: 30 A

Dimensions (L x W x H): 184 x 114 x 38 mm

 

COMMON DSP FEATURES

Sigma DSP 28-/56-bit 50 MIPS digital audio processor 24-bit stereo audio ADC and DAC: >98 dB SNR Sampling rates 96 kHz

 

704 DSP PRO

Bluetooth connection and control of DSP settings via Android and Iphone apps

Time alignment adjustable from 0 up to 2.30 m for each speaker – 7 bands Parametric EQ for front and rear speakers – Fully customizable crossover from 0 to 24dB / octave on all outputs – 6 RCA outputs for connecting additional amplifiers including 2 fully configurable for subwoofers – 5 favorites settings memorized in the amplifier – Unlimited setting memorized in the phone – 3D Surround Sound – Adjusting the bass independent – Setting the phase and the activation of each channel.

 

 

 

 

 
BLAM FRS 3N50+ 3''

BLAM FRS 3N50+ 3''

460,00€
Description

BLAM-AUDIO

EXTENDED FREQUENCY RESPONSE DRIVER

 

Composition

Full-range driver 3’’ (80 mm)

Max. power 100 W / Nom. power 25 W

Frequency response 200 Hz – 30 kHz

Sensitivity (2.83 V / 1m) 91 dB – Impedance 3 Ω

 

Die cast aluminum basket – Ultra rigid carbon fiber cone – Butyl surround – Long life “conex” spider – 20 mm voice coil, fiber glass former – Oversized neodymium ring magnetic motor – Aluminum magnesium phase plug – Products matched to + -1 dB.

 

T-Yoke equipped with a faraday copper ring which limits the creation of Foucault currents

 

 

 

OS80 compatible with FRS3N50+

MACHINED SOLID ALUMINIUM SEALED ENCLOSURE

Available in two colors: light grey and mat black


ΠΕΡΙΣΣΟΤΕΡΕΣ ΠΛΗΡΟΦΟΡΙΕΣ

BLAM Kit 165RX

BLAM Kit 165RX

200,00€

Kit 165RX

2-WAY 165 MM SPEAKER SYSTEM

Technical details

This kit is composed of two 165mm (6.5″) woofers, two 20mm (3/4″) soft dome tweeters and two 2-way crossovers: low-pass 6dB/octave and high-pass 12dB/octave with adjustable tweeter level -3dB, 0dB and +3dB.

High performance 2 way split system
165 mm woofer
Max Power 150 W – Nominal Power 75 W
Frequency response 60 Hz – 25 kHz
Sensitivity 95 dB – Impedance 2 Ω

Composition

  • 165R2 WOOFER 165 MM

    165 mm (6.5”) woofer

    Maximum power 150 W / Nominal power 75 W

    Frequency response 60 Hz – 8 kHz

    Sensitivity 95 dB – Impedance 2 Ω

Fiberglass-reinforced composite saladier – High-quality treated cellulose pulp diaphragm – Butyl peripheral suspension – “Conex” long-life spider – Magnetic motor Long-life “Conex” spider – 25 mm coil on Kapton support – 85 mm x 17 mm magnetic motor – Thick magnetic circuit (5 mm)

  • R2T20 SOFT DOME TWEETER
    High quality 20 mm soft dome tweeter
    Maximum power 100 W / Rated power 10 W
    Frequency response 2.5 kHz – 25 kHz
    Sensitivity 90 dB – Impedance 3 Ω

N38 neodymium motor – Special high-quality soft dome – Ferrofluid for high power output

  • 2-way filters
    low-pass 6 dB/octave
    12 dB/octave high-pass with adjustable tweeter level -3 dB, 0 dB and +3 dB.

Accessories included:
Fixing screws
Mounting accessories for tweeters
Instructions for use

Blam L165C - Acoustic (2 Δρόμων)

Blam L165C - Acoustic (2 Δρόμων)

350,00€
L165C - Acoustic

Description

With its « French Sound » conception, the BLAM L165C trustfully recreates the acoustic instruments and the voices emotions for a more natural and mesmerizing result.

Its rigid and light composite membrane, with a 28mm diameter coil, grants it dynamism and details that give life to the tracks. As a result, you forget the system to leave space to the music

 

System includes two 165 mm (6.5”) coaxial speaker with 25 mm (1”) soft dome tweeters and with integrated high pass 6 dB/octave crossover

 

It is also available in Black Edition (woofers and tweeters black)

 

Composition

L165C HIGH FIDELITY WOOFER

165 mm (6.5″) woofer

Max power 140 W – Nominal power 70 W

Frequency response 60 Hz – 25 kHz

Sensitivity 94 dB – Impedance 2 Ω

 

Machined cast aluminium basket – Epoxy resin and glass fiber cone – Butyl rubber surround – Long life “Conex” damper – 28 mm (1.1’’) voice coil with kapton former – 80 mm x 15 mm (3.1’’ x 0.6’’) motor assembly – Thick magnetic circuit 5 mm

 

Supplied Accessories:

Mounting screws

User manual


 

BLAM LA 4100

BLAM LA 4100

580,00€
Description

100 W X 4 CHANNEL CLASS AB PURE SQ AMPLIFIER

 

We developed the LIVE amplifiers by considering every parameter; bringing them to life by measuring and listening to each design concept until they reached our design target.

 

The result is a huge reserve of power that reproduces every detail of the music. Low frequency information is precisely reproduced with impressive authority. Their large heatsink area keeps the amplifier cool, increasing stability and reliability.

 

Their robust design is combined with a high-end finish and are available in two colors: black or silver.

 

Composition

Caractéristics

 

• RCA low level inputs: 0.5 V

• RMS Power (4 Ω): 4 x 100 W

• RMS Power (2 Ω): 4 x 130 W

• RMS Bridged Power (4 Ω): 2 x 260 W

• Low pass crossover: 50 Hz – 3 kHz (12 dB/octave) (Rear)

• High pass crossover: 50 Hz – 3 kHz (12 dB/octave) (Front), 15 Hz – 500 Hz (12 dB/octave) (Rear)

• Frequency response : 10 Hz – 45 kHz

• Bass boost: 0-10 dB at 45 Hz (Rear)

• Signal/noise ratio > 100 dB

• Remote subwoofer level control: 0-10 dB (Rear)

• Mono/Stereo selector (Rear)

• Protections: short circuit / low impedance /

reversal of polarity / heat protection

• Dimensions (L x W x H): 416 x 217 x 60 mm – 16.3’’ x 8.5’’ x 2.4’’

 

It is also available in the Black Edition

Remote level control is optional


ΠΕΡΙΣΣΟΤΕΡΕΣ ΠΛΗΡΟΦΟΡΙΕΣ

BLAM OM 160 EC

BLAM OM 160 EC

80,00€

OM 160 EC coaxial kit

High-efficiency 2-voice coaxial kit
Maximum power 120 W – Nominal power 60 W
Frequency response 70 Hz – 21 kHz
Impedance 2 Ω – Sensitivity 93 dB

This kit includes two 160mm woofers with 13mm coaxial tweeters and two integrated 6dB/octave high-pass filters.

Woofer :
Specific deep-drawn steel basket
Treated cellulose pulp membrane
Peripheral butyl surround
Spider long life ”Conex
25 mm coil on kapton support
Magnetic motor 80 x 15 mm (Y30)

Coaxial tweeter :
13 mm polycarbonate dome
Neodymium motor
Accessory for flush or inclined mounting

Integrated 6dB/octave high-pass filter

ΠΕΡΙΣΣΟΤΕΡΕΣ ΠΛΗΡΟΦΟΡΙΕΣ

BLAM P704

BLAM P704

280,00€

4/3/2-channel amplifier is designed for flexible, powerful audio performance.


It features low-level (0.25-6 V) compatible RCA inputs for versatile connectivity.


Power ratings of 4 x 70 Watts RMS into 4 Ω, 4 x 110 Watts RMS into 2 Ω, and bridge configuration power of 2 x 230 Watts RMS into 4 Ω


This amplifier ensures optimum sound reproduction for your loudspeakers.


Frequency response from 10 Hz to 30 kHz, with low-pass (50 Hz – 250 Hz) and high-pass (50 Hz – 250 Hz) filters to fine-tune frequencies. It boasts a signal-to-noise ratio in excess of 90 dB and a total harmonic distortion (THD) of less than 0.05%, guaranteeing superior sonic clarity.


It is protected against short circuits, low impedance, overheating and reverse polarity.


Dimensions are 174 x 158 x 99 mm (6.85“ x 6.2” x 3.9″).

BLAM RA 704 RT

BLAM RA 704 RT

450,00€
RA 704 RT

Description

4-CHANNEL PLUG & PLAY AMPLIFIER WITH INTEGRATED DSP

 

Plug and play installation in the car without cutting original wires (different cables available). Delivered with cable.

 

RMS Power (4 Ohms) when powered directly from Battery 70 W x 4

RMS Power (4 Ohms) when powered from OEM Wires 50 W x 4

Frequency response: 20 Hz ~ 20 KHz

Distortion: 1 KHz < 0.1%

Supply voltage range: 9 V – 15 V

Signal/Noise ratio: > 90 dB

Standby current: < 0.4 mA

Class-D amp efficiency: 95%+

Maximum operating current: 30 A

Dimensions (L x W x H): 184 x 114 x 38 mm

 

 

COMMON DSP FEATURES

Sigma DSP 28-/56-bit 50 MIPS digital audio processor 24-bit stereo audio ADC and DAC: >98 dB SNR Sampling rates 96 kHz

 

 

 

RA 704 RT Bluetooth connection and control of DSP settings via Android Smart phone App

Independent 7 Band Graphic EQ for front and rear Speakers – 5 different preset EQ, Classical, Rock, Theater, Jazz, Pop, Bass Booster – SRS 3D Surround sound – Dynamic Bass setting – Easy phase change and speaker muting of all speakers by APPS – Time Alignment adjustable from 0 up to 230 cm for each – 4 RCA Output for additional amplifier.
BM 100 NC

BM 100 NC

190,00€

Technical details This kit consists of two 100 mm BMW special plug & play woofers, two 20 mm soft-dome coaxial tweeters and two built-in 6 dB/octave high-pass filters. 100 mm woofer Max power 100 W / 50 W nominal Frequency response 80 Hz / 30 kHz Sensitivity 90.3 dB – Impedance 2 Ω Composition Woofer: Original BLAM Fiberglass Reinforced Composite Bowl with Dual BMW Plug & Play Connector High-quality fiberglass diaphragm Long-life Spider butyl peripheral pendant lamp "Conex" 25 mm coil on Kapton stand 24.5 x 6 mm neodymium magnet Thick magnetic circuit (4 mm ) Supplied accessories: Instructions for use


ΠΕΡΙΣΣΟΤΕΡΕΣ ΠΛΗΡΟΦΟΡΙΕΣ

BM 100 NS

BM 100 NS

300,00€

Technical specification

This kit includes two 100 mm BMW special plug & play woofers, two 25 mm soft-dome tweeters and two 6 dB/octave in-line high-pass filters.

100 mm woofer
Max power 100 W / 50 W nominal
Frequency response 80 Hz / 30 kHz
Sensitivity 90.3 dB – Impedance 2 Ω

Composition

Woofer :
Original BLAM glass-fiber reinforced composite salad bowl with BMW Plug & Play double connector
High-quality fiberglass membrane
Peripheral butyl surround
Spider long life ”Conex
25 mm voice coil on Kapton former
Neodymium magnet 24.5 x 6 mm
Thick magnetic circuit (4 mm)

Accessories included:
Instructions for use

CR25

CR25

100,00€

Technical details Enclosed subwoofer enclosure for 25 cm, dark grey carpet MDF 15 mm Dimensions: H 320 mm x D 140 mm x W 500 mm . Foam backing provided Compatible with the Relax RS10 subwoofer


 

DSP BLAM LSP 68

DSP BLAM LSP 68

650,00€
Description

6 INPUT TO 8 OUTPUT HIGH PERFORMANCE DIGITAL AUDIO PROCESSOR

 

• 64-bit Digital signal processor

• Sampling frequency 96 kHz

• 4 high level input

• 6 low level input

• 1 optical input

• 1 digital signal input

• BT 5.0 antenna

• 8 output

• Variable equalizer: 31 bands (CH 1-6) and 11 bands (CH 7-8)

• Selectable slope 6-48 dB, Butterworth, Linkwitz or Bessel alignment

• Up to 15 ms time delay available on each channel

• Dimensions size (L x W x H): 197 x 129 x 32 mm – 7.8’’ x 5.1’’ x 1.3’’

• Remote level control included

 

Specifications:

Power supply: 9.5 V – 16.5 V

Frequency response: 20 Hz – 22 kHz

Input sensitivity: 4 V – 12.5 V

Max Output level: ≥ 4 V

 

Composition

Windows software: BLAM LSP68

 

Smartphone App for Android: BLAM LSP68


ΠΕΡΙΣΣΟΤΕΡΕΣ ΠΛΗΡΟΦΟΡΙΕΣ

Εμφάνιση 1 έως 15 από 79 (6 Σελ.)
Τα Cookies μας βοηθάνε να βελτιώσουμε τις υπηρεσίες μας και είναι απαραίτητα για να λειτουργήσει η ιστοσελίδα. Χρησιμοποιώντας τις υπηρεσίες μας συμφωνείτε στη χρήση των cookies.
  ΔΙΑΒΑΣΤΕ ΠΕΡΙΣΣΟΤΕΡΑ