4-4 CONNECT
4-600111
With a terminal block you can double the cable crosssurface connected to your amplifier. Fits to ground and power terminals.
4-600145
Four Connect 4-600145 Διανομέας Γείωσης με 2 εισόδους 50 mm² και 4 εξόδους επίσης 50 mm²
- 2 εισόδους
- 4 εξόδους
- 6 μειωτήρες που μετατρέπουν τα καλώδια σε 20mm².
4-630509
- automatic remote output when detecting signal
4-ISOPIONEER16P2010>
Did you forget your radio harness to your previous car? With FOUR Connect ISO-harness you can use your radio again. This harness is suitable to Kenwood car radios. Because manufacturers change sometimes their connectors, compare product picture to your radios connector to find out compatibility. This harness fits to Pioneer radios manufactured 2010 and later
4-MP400BTi
4-PKIT20
amplifier wiring kit
20 mm2 power and ground cables
5m power cable with ring terminal
1m ground cable with ring terminal
5.5m RCA cable with remote
accessories included
4-600112
- terminal to 50 mm2 cable
- fits to 20 mm2 termi - terminal to 50 mm2 cable
- fits to 20 mm2 terminal in amplifier
- isolation included
4-600113
- ground terminal
- for 50 mm2 cable
- 3x 8 mm h - ground terminal
- for 50 mm2 cable
- 3x 8 mm holes to attachment to surface
4-600118
- crimp tool
- for 8-70 mm2 connectors
- works w - crimp tool
- for 8-70 mm2 connectors
- works with all connectror materials
- easy and fast use with hammer
- allways use safety goggles
4-600119
- cable cutter and stripper tool
- suitable for c - cable cutter and stripper tool
- suitable for cutting 0-70 mm2 copper and cca-cables
- stripping blades to 1.5-8 mm2 cables
- possible to strip even 70 mm2 cables using cutting blades
4-600120
4-600123
Cable extension connector with 4 connectors. Maximum cable size 6 mm2. Very handy product for example fast connection of a subwoofer enclosure.
4-600125
This kind of distribution block is exactly like they all should be. Every connection is drilled to 50 mm2 size. And all them have contraction sleeves that make connection to fit 20 mm2 cable. If you take sleeve out, it fits to 50 mm2 cable.
4-600131
Fuseholder is a critical component of your power system. It has to have good and tight connections and it has to last years in harsh environment without getting oxidated. This fuselholder can take 70 mm2 cable, if you take out the cable sleeve that decreases size to 35 mm2 cables.
