Ενισχυτής GAS AUDIO PRO 80.2

145,00€

2-CHANNEL AMPLIFIER 2x80W

GAS PRO 80.2 is the 2-channel amplifier of the PRO line-up that easily supplies power for your front or rear speaker system. Class AB technology, relatively compact size which makes it possible to hide it for a discrete installation. Like other GAS products, PRO 80.2 has a stylish, sober design with orange edges and a prominent GAS logo on top.

The amp delivers 2x80W RMS / 4ohm, which is sufficient enough for a pair of speakers. The channels can also be bridged when using the amp for a subwoofer. In bridged mode, PRO 80.2 gives us 1x240W RMS 4ohm!

SPECIFICATIONS

TYPE:
DIMENSIONS (WxHxD):
FREQUENCY RESPONSE:
BASS BOOST:
WATT (RMS):

2-Channel Amplifier
168x53x230mm
20Hz-30kHz
0-15 dB

2x120W @ 2 ohm, 2x80W @ 4 oh

Ενισχυτής GAS AUDIO PSP 2500 2DF

550,00€

AMPLIFIER 2x2500W

ART: PSP25002DF

GAS PRO SPL POWER 2500.2DF is a 2-channel amplifier designed for extreme SPL builds. This powerful beast from the PRO SPL series is based on the latest Class D technology, which paves the way for a higher efficiency than ever before. The total power output is an incredible 2x2500W RMS at 1 ohm, and it’s also possible to bridge it down to 2 ohm and get the full 5000W RMS. This amplifier is the perfect choice for those that want to fill the entire car with speakers!

Since this amplifier is rull-range it is ideally suited for, for example, connecting up to 64 8 ohm midbass speakers for an impressive SPL build! With that amount of speakers, it is important with a correct wiring for the impedances to match. The possibilites are endless!

GAS PRO SPL
The PRO SPL series amplifiers is based on a new Class D technology that paves the way for higher efficiency than ever before. Class D amplifiers usually have an efficiency at about 90%, but the amplifiers in the PRO SPL series are stable at 93%. This means that the power sent to the amplifier is used in a very efficient way, instead of losing power and generating heat. Thanks to this technology, the amplifiers can be manufactured in a more compact format while still supplying plenty of power.

Fine-tune the sound and make it sound really good by using the low pass or high pass filter. Don’t forget that you also can operate a pair of really powerful bass speakers if you bridge the amplifier!

Specifications

TYPE: 2-channel amplifier, Class-D
FREQUENCY RESPONSE: 20Hz-20kHz
CROSSOVER: High pass, low pass and fullrange
UNIT: Pc
POWER HANDLING (RMS): 2x750W @ 4 ohm, 2x1500W @ 2 ohm, 2x2500W @ 1 ohm, 1x3000W @ 4 ohm bryggat, 1x5000W @ 2 ohm bryggat

Ενισχυτής GAS AUDIO TFP 500.1 24V

188,00€

MONO AMPLIFIER 24V

GAS TFP 500.1 24V is a compact and light-weighted amplifier, specially made for enclosures in trucks and other 24 volt vehicles. The neat construction of this amplifier makes it very easy to mount in the small compartments, but it’s also good-looking, so why hide it?

Class-D technology paves the way for a lot of power and high efficiency. This technology generates less heat, which helps when delivering high amounts of power. The amplifier is equipped with a variable lowpass crossover and bass remote is included.

Download GAS TFP 500.1 Manual

Specifications

TYPE:
FREQUENCY RESPONSE:
CROSSOVER:
HIGH IN:
UNIT:
DIMENSIONS (BxHxD):
POWER HANDLING (RMS):

Mono
20-150Hz
Lowpass 50-150Hz
Yes, with auto turn on
PC
203/225x46x113mm
1x300W @ 4 ohm,
1x500W @ 2 ohm,

Ενισχυτής GAS AUDIO TFP 70.4 24V

188,00€

4-CH AMPLIFIER 24V

GAS TFP 70.4 24V is a compact and light-weighted 4-ch amplifier, specially made for powering speakers in trucks and other 24 volt vehicles. The neat construction of this amplifier makes it very easy to mount in the small compartments, but it’s also good-looking, so why hide it?

Class-D technology paves the way for a lot of power and high efficiency. This technology generates less heat, which helps when delivering high amounts of power. The amplifier is equipped with a variable lowpass & highpass crossover.

Specifications

TYPE:
FREQUENCY RESPONSE:
CROSSOVER:
UNIT:
POWER HANDLING (RMS):

4-ch amplifier
15-30kHz
High och Lowpass
PC
4x70W @ 4 ohm,
4x110W @ 2 ohm,
2x220W @ 4 ohm
bridged

Ενισχυτής GAS MAD A1-500.1D 1 Κανάλι

138,00€

GAS MAD A1-500.1 is the solution for those who want to fill the car with great bass - without having to break the piggy bank! Whether you just want to give the lower frequency range a real push in the right direction or stand in a parking lot and play, this power amp will impress! The amplifier power is 500W RMS in 1 Ohm and the variable dividing filter for subsonic and low pass makes it possible to have full control over how the bass box should play!

500W RMS i 1 Ohm
370W RMS i 2 Ohm
230W RMS i 4 Ohm
Cocky design
Really good sound
Class D
High level input with autostart
RCA output, for easy forwarding to another output stage
Bass remote included
CLIP-indicator

Stays cool, in all situations
The MAD A1 series replaces the best sellers from the BEAT series. GAS has looked after everything. It has been tweaked, optimized and tested. The final result is finally here! At first glance, the eye will be drawn to the heat-dissipating chassis. This ensures optimal cooling for the best possible performance! You can safely sit back and enjoy your favorite music, even when you push the system to its limit. Overheating is a thing of the past, and you can listen to your music completely without interruption.

Amazing outside, impressive inside
It's not all about performance, it's important to be able to have the final step visible in the car without being embarrassed. The streamlined design with thoughtful detailing makes the MAD A1 a final stage you'll be proud to display in your audio build! You know what the coolest thing is? If you look at how the final stage is built, you'll see that the inside has also received some love. The balanced differential inputs also ensure that the output stages deliver less noise, even better sound quality - hard to beat in this price range!

Get the sound in order
Take control of your audio experience! The power stage is equipped with a low-pass filter with 12 dB steepness, it makes it possible to build the bass build you always dreamed of. Connection is smoother than ever. On the MAD A1 power amplifiers you will find, in addition to RCA inputs, a high-level input. It makes it easier than ever to plug in, set up and start playing.

Puts safety first
It can be a bit tricky to connect the final stage. There is a lot to think about when the connection is to be carried out. You should find a good ground point, maybe run cables through the car and connect the speaker elements correctly. Should there be a fault along the way, GAS has implemented advanced protection circuitry that minimizes the risk of DC, thermal, overload and short circuit problems. The idea is that you should be able to enjoy your favorite music. Completely worry-free!

Specifications
1x500W @ 1 Ohm
1x370W @ 2 Ohm
1x230W @ 4 Ohm
Frequency Range: 15-300 Hz
Low Pass Filter: 30-300 Hz
Subsonic: 15-50 Hz
T.HD: <0.5%
Damping Factor: >130

Ενισχυτής GAS MAD A1-70.2 2 Καναλιών

89,00€

GAS MAD A1-70.2 is an affordable 2-channel power amplifier with a sound that beats most in its price range! Whether you just want to improve the sound in the car or stand in a parking lot and play, this final stage will impress! The amplifier power is 2x70W RMS in 4 Ohms and the variable dividing filter for high and low pass makes it possible to use the output stage to drive mid-bass, treble or a bass box in bridged mode.

2x70W RMS i 4 Ohm
2x105W RMS i 2 Ohm
1x220W RMS in 4 Ohms (in bridged mode)
Cocky design
Really good sound
Class AB
High level input with autostart
RCA output, for easy forwarding to another output stage
CLIP-indicator

Stays cool, in all situations
The MAD A1 series replaces the best sellers from the BEAT series. GAS has looked after everything. It has been tweaked, optimized and tested. The final result is finally here! At first glance, the eye will be drawn to the heat-dissipating chassis. This ensures optimal cooling for the best possible performance! You can safely sit back and enjoy your favorite music, even when you push the system to its limit. Overheating is a thing of the past, and you can listen to your music completely without interruption.

Amazing outside, impressive inside
It's not all about performance, it's important to be able to have the final step visible in the car without being embarrassed. The streamlined design with thoughtful detailing makes the MAD A1 a final stage you'll be proud to display in your audio build! You know what the coolest thing is? If you look at how the final stage is built, you'll see that the inside has also received some love. The balanced differential inputs also ensure that the output stages deliver less noise, even better sound quality - hard to beat in this price range!

Get the sound in order
Take control of your audio experience! The power stages are equipped with high-pass and low-pass filters with 12 dB steepness, it makes it possible to build the sound system you always dreamed of. Do you want to connect a bass box? No worries! Or do you want to push your trebles on the final stage? No problem! The final stage offers deep, pounding bass or crystal clear treble. Plug in, set up and start playing - that's all!

Puts safety first
It can be a bit tricky to connect the output stage. There is a lot to think about when the connection is to be carried out. You should find a good ground point, maybe run cables through the car and connect the speaker elements correctly. Should there be a fault along the way, GAS has implemented advanced protection circuitry that minimizes the risk of DC, thermal, overload and short circuit problems. The idea is that you should be able to enjoy your favorite music. Completely worry-free!

Specifications
2x70W @ 4 Ohm
2x105W @ 2 Ohm
1x220W (bridged) @ 4 Ohm
Frequency range: 15-22,000 Hz
Attenuation factor: >130
T.H.D+N: 0.5%
High pass filter: 50-4,000 Hz Low
pass filter: 50-4,000 Hz

Ενισχυτής GAS MAD A1-70.4 4Καναλιών

122,00€

GAS MAD A1-70.4 is an affordable 4-channel power amplifier with a sound that beats most in its price range! Whether you just want to improve the sound in the car or stand in a parking lot and play, this final stage will impress! The amplifier power is 4x70W RMS in 4 Ohms and the variable dividing filter for high and low pass makes it possible to use the output stage to drive mid-bass, treble or a bass box in bridged mode.

4x70W RMS i 4 Ohm
4x105W RMS i 2 Ohm
2x220W RMS in 4 Ohm (in bridged mode)
Cocky design
Really good sound
Class AB
High level input with autostart
RCA output, for easy forwarding to another output stage
CLIP-indicator

Stays cool, in all situations
The MAD A1 series replaces the best sellers from the BEAT series. GAS has looked after everything. It has been tweaked, optimized and tested. The final result is finally here! At first glance, the eye will be drawn to the heat-dissipating chassis. This ensures optimal cooling for the best possible performance! You can safely sit back and enjoy your favorite music, even when you push the system to its limit. Overheating is a thing of the past, and you can listen to your music completely without interruption.

Amazing outside, impressive inside
It's not all about performance, it's important to be able to have the final step visible in the car without being embarrassed. The streamlined design with thoughtful detailing makes the MAD A1 a final stage you'll be proud to display in your audio build! You know what the coolest thing is? If you look at how the final stage is built, you'll see that the inside has also received some love. The balanced differential inputs also ensure that the output stages deliver less noise, even better sound quality - hard to beat in this price range!

Get the sound in order
Take control of your audio experience! The power stages are equipped with high-pass and low-pass filters with 12 dB steepness, it makes it possible to build the sound system you always dreamed of. Do you want to connect a bass box? No worries! Or do you want to push your trebles on the final stage? No problem! The final stage offers deep, pounding bass or crystal clear treble. Plug in, set up and start playing - that's all!

Puts safety first
It can be a bit tricky to connect the output stage. There is a lot to think about when the connection is to be carried out. You should find a good ground point, maybe run cables through the car and connect the speaker elements correctly. Should there be a fault along the way, GAS has implemented advanced protection circuitry that minimizes the risk of DC, thermal, overload and short circuit problems. The idea is that you should be able to enjoy your favorite music. Completely worry-free!

Specifications
4x70W @ 4 Ohm
4x105W @ 2 Ohm
2x220W (bridged) @ 4 Ohm
Frequency range: 15-22,000 Hz
Attenuation factor: >130
T.H.D+N: 0.5%
High-pass filter: 50-4,000 Hz
Low-pass filter: 50-4,000 Hz

Κόρνα GAS MAD PT1-254 (Τιμή τεμαχίου)

26,00€

Series	MAD
Component	Tweeter
Size	1 inch
Nominal Impedance	4 Ohm
Power RMS	50W
Power MAX	100W
Freq. response	2000-20.000 Hz
Magnet	HQ Ferrite

Κόρνα GAS MAD PT2-254 (Τιμή τεμαχίου)

29,00€

Series	MAD
Component	Tweeter
Size	1 inch
Nominal Impedance	4 Ohm
Power RMS	50W
Power MAX	100W
Freq. response	2000-20.000 Hz
Magnet	HQ Ferrite

Ομοαξονικά ηχεία GAS AUDIO ALPHA 556

60,00€

5.25 ″ SPEAKER

GAS ALPHA556 is a 5.25 ″ coaxial speaker that offers an affordable upgrade of your car sound. High sensitivity of 91dB and power resistance of 50W RMS means that this is a speaker that with small power means can deliver really well. Stylish GAS design, revised treble for additional well-detailed tops and a consistently good sound.

SPECIFICATIONS

SPEAKER TYPE:
SIZE:
SENSITIVITY:
POWER (RMS):
MAX POWER:
FREQUENCY RANGE:
IMPEDANCE:
MOUNTING DEPTH:
MOUNTING HOLE:
UNIT:

Coaxial speaker
5.25 ″
91dB
50W
100W
60-23.000Hz
4 ohm
55mm
114mm
Pair

Ομοαξονικά ηχεία GAS AUDIO GS 32

55,00€

3.5 ″ SPEAKER

GS32 is a 3.5 ″ coaxial speaker from the GAS classic Silver series. With a power of 50W RMS , it is a really powerful 3.5 ″ that works great to give your sound that little extra. Is also an easy-to-drive speaker that makes the most of the effect it gets.

Equipped with a powerful magnet and a construction with well-selected and well-proven parts, which creates a balanced and pleasant sound reproduction with good features in the bass register, and a full middle register and a 3/4 ″ silk dome tweeter. Perfect choice when it's time to upgrade the sound in the car to a higher quality sound.

SPECIFICATIONS

SPEAKER TYPE:
SIZE:
SENSITIVITY:
POWER (RMS):
MAX POWER:
FREQUENCY RANGE:
IMPEDANCE:
UNIT:

Coaxial speaker
3.5 ″
89dB
50W
100W
90-20kHz
4 ohm
Par

Ομοαξονικά ηχεία GAS AUDIO GS 62

84,60€

6.5 ″ SPEAKER

GS62 is a 6.5 ″ coaxial speaker from the GAS classic Silver series. With an output of 100W RMS , it is a perfect alternative when you want to combine a real pressure with fantastic sound. Is still an easy-to-drive speaker that makes the most of the effect it gets.

Equipped with a powerful magnet and a construction with well-selected and well-proven parts, which creates a balanced and pleasant sound reproduction with good features in the bass register, and a full midrange and treble. Perfect choice when it's time to upgrade the sound in the car to a higher quality sound. The speakers come with speaker grilles, cables and screws.

SPECIFICATIONS

SPEAKER TYPE:
SIZE:
SENSITIVITY:
POWER (RMS):
MAX POWER:
FREQUENCY RANGE:
IMPEDANCE:
MOUNTING DEPTH:
MOUNTING HOLE:
UNIT:

Coaxial speaker
6.5 ″
92dB
100W
200W
60-20kHz
4 ohm
70mm
142mm
Pair

Ομοαξονικά ηχεία GAS AUDIO GS 62SL

84,60€

6.5″ COAXIAL SPEAKER

GS62SL is a high quality slim 6,5″ coaxial speaker. Based on the GS62 speaker but with a lower mounting depth. The smooth speaker is easy to install, making it a better alternative in cars where the is no space in abundance.

Over-sized magnet and constructed with the use of only hand-picked components and materials. With the bigger sizes of the Silver speakers comes more pressure in the low frequencies, further providing a new dimension to your music. Speaker grills, cables and screws are included with the product.